Nodweddion:
- Band eang
- Maint Bach
- Colled Mewnosodiad Isel
Mae rhannwr / cyfuniad pŵer RF yn ddyfais a ddefnyddir yn eang mewn systemau cyfathrebu diwifr. Ei brif swyddogaeth yw rhannu signal mewnbwn yn signalau allbwn lluosog tra'n cadw nodweddion gwreiddiol y signal, neu i syntheseiddio signalau mewnbwn lluosog yn un allbwn. Ar gyfer math o rannydd pŵer goddefol, egwyddor dylunio rhannwr / cyfuniad pŵer 8-ffordd yw adeiladu rhwydwaith cangen gan ddefnyddio llinellau cangen microstrip, a defnyddio llinellau trawsyrru microstrip tonfedd chwarter ar gyfer paru rhwystriant, fel bod rhwystriant pob porthladd yn cyfartal i 50 ohms. Wrth ganghennog, cyflawnir yr effeithlonrwydd uchaf o drosglwyddo ynni.
1. Wrth ddefnyddio rhannwr/cyfunwr pŵer 8-ffordd fel rhannwr pŵer, mae 1 porthladd mewnbwn ac 8 porthladd allbwn; Pan gaiff ei ddefnyddio fel cyfuno, mae yna 8 porthladd mewnbwn ac 1 porthladd allbwn.
2. Bod â nodweddion trydanol megis amlder gweithredu eang, colled mewnosod isel, ennill uchel ac ynysu.
3. Technoleg aeddfed a pherfformiad sefydlog. Er mwyn lleihau'r effeithlonrwydd trosglwyddo a achosir gan adlewyrchiad signal, fe wnaethom gynnal dyluniad paru rhwystriant a gwneud y gorau o gymhareb tonnau sefydlog y porthladd; Er mwyn lleihau adlewyrchiad signal a achosir gan effeithiau pontio, pontio o gysylltwyr cyfechelog i linellau microstrip; Er mwyn ehangu lled band a chynnal cymhareb tonnau sefydlog isel, gwella dyluniad cangen cyfateb rhwystriant; Er mwyn osgoi cyseiniant o fewn yr ystod amledd gweithredu, gwneud y gorau o'r strwythur ceudod.
Mae gan holltwyr / cyfunwyr pŵer 8-ffordd lawer o gymwysiadau yn y maes RF, gan ddarparu signalau ar gyfer profi, syntheseiddio porthiant i antena ac oddi yno, rhannu signalau sydd eisoes wedi'u trosglwyddo a'u derbyn ar linellau ffôn, a dibenion amrywiol eraill.
The Qualwave inc. darparu holltwyr/cyfunwyr pŵer 8-ffordd gydag ystod amledd o DC ~ 67GHz, pŵer hyd at 600W, colled mewnosod uchaf o 23dB, ac ynysu lleiaf o 6dB. Rydym yn cynnig opsiynau cysylltydd amrywiol megis SMA, N, TNC, N & SMA, 2.4mm, 2.92mm, ac ati Mae ein cynnyrch wedi cael eu defnyddio'n eang ac yn canmol mewn meysydd lluosog.
Rhif Rhan | Amlder RF(GHz, Min.) | Amlder RF(GHz, Max.) | Grym fel Rhannwr(W) | Pŵer fel Cyfunwr(W) | Colled Mewnosod(dB, Max.) | Ynysu(dB, Cof.) | Balans Osgled(±dB, Uchafswm) | Balans Cyfnod(±°, Uchafswm.) | VSWR(Uchafswm.) | Cysylltwyr | Amser Arweiniol(Wythnosau) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD8-0-2000-2 | DC | 2 | 2 | - | 19 | 17.5 | ±0.5 | ±1 | 1.25 | N, TNC | 2~3 |
QPD8-0-2000-2-S | DC | 2 | 2 | - | 19 | 17.5 | 0.3 | ±3 | 1.15 | SMA | 2~3 |
QPD8-0-3000-2-S | DC | 3 | 2 | - | 18±1.5 | 18 | ±1.0 | - | 1.3 | SMA | 2~3 |
QPD8-0-3000-2-N | DC | 3 | 2 | - | 19.5 | 18.5 | ±0.5 | ±2 | 1.3 | N | 2~3 |
QPD8-0-4000-2-S | DC | 4 | 2 | - | 19.5 | 17 | 0.8 | ±8 | 1.4 | SMA | 2~3 |
QPD8-0-6000-2-S | DC | 6 | 2 | - | 18±2.5 | 18 | ±1.2 | - | 1.5 | SMA | 2~3 |
QPD8-0-8000-2 | DC | 8 | 2 | - | ±2(teip.) | 16 | ±5 | ±90 | 1.9 | SMA, N | 2~3 |
QPD8-0-10000-R5-S | DC | 10 | 0.5 | - | 18±2.8 | - | ±2 | - | 1.6 | SMA | 2~3 |
QPD8-0-18000-1-S | DC | 18 | 1 | - | 23 | 10 | ±1.2 | - | 2.5 | SMA | 2~3 |
QPD8-0-26500-2-S | DC | 26.5 | 2 | - | 3 | 18 | 2 | 2 | 1.6 | SMA | 2~3 |
QPD8-0-40000-2-K | DC | 40 | 2 | - | 4 | 18 | 2 | 2 | 1.6 | 2.92mm | 2~3 |
QPD8-2-250-1-S | 0.002 | 0.25 | 1 | - | 1 | 25 | ±0.2 | ±2 | 1.3 | SMA | 2~3 |
QPD8-5-500-10-N | 0.005 | 0.5 | 10 | - | 1.5 | 20 | 0.3 | ±5 | 1.25 | N | 2~3 |
QPD8-5-1000-1-S | 0.005 | 1 | 1 | 0.25 | 3 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-5-1000-50-S | 0.005 | 1 | 50 | 50 | 1.6 | 12 | ±0.2 | ±5 | 1.5 | SMA | 2~3 |
QPD8-5-2000-1-S | 0.005 | 2 | 1 | 1 | 5 | 15 | ±0.5 | ±5 | 1.8 | SMA | 2~3 |
QPD8-10-100-1-S | 0.01 | 0.1 | 1 | 0.5 | 1 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD8-20-100-K15-S | 0.02 | 0.1 | 150 | 150 | 1.3 | 20 | 0.2 | ±5 | 1.5 | SMA | 2~3 |
QPD8-20-520-K2-S | 0.02 | 0.52 | 200 | 200 | 1 | 12 | 0.5 | 5 | 1.6 | SMA | 2~3 |
QPD8-30-500-K1-N | 0.03 | 0.5 | 100 | 100 | 0.75 | 20 | 0.3 | ±5 | 1.4 | N | 2~3 |
QPD8-30-3000-2-S | 0.03 | 3 | 2 | - | 18.5 | 17 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-70-500-K15-S | 0.07 | 0.5 | 150 | 150 | 1 | 12 | 0.2 | 3 | 1.5 | SMA | 2~3 |
QPD8-70-1010-K6-NS | 0.07 | 1.01 | 600 | 600 | 1.8 | 8 | 0.3 | 5 | 1.5 | SMA&N | 2~3 |
QPD8-80-500-30-S | 0.08 | 0.5 | 30 | 2 | 1.8 | 18 | ±0.2 | ±3 | 1.3 | SMA | 2~3 |
QPD8-80-1000-K2-S | 0.08 | 1 | 200 | 200 | 1.3 | 15 | ±0.2 | ±5 | 1.35 | SMA | 2~3 |
QPD8-80-4000-30-S | 0.08 | 4 | 30 | 2 | 6.6 | 13 | 0.4 | ±8 | 1.55 | SMA | 2~3 |
QPD8-98-102-30-N | 0.098 | 0. 102 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | N | 2~3 |
QPD8-100-700-1-S | 0.1 | 0.7 | 1 | 0.5 | 2 | 18 | 0.4 | ±8 | 1.5 | SMA | 2~3 |
QPD8-100-700-30-S | 0.1 | 0.7 | 30 | 2 | 2 | 20 | 0.3 | ±3 | 1.25 | SMA | 2~3 |
QPD8-100-2000-30-S | 0.1 | 2 | 30 | 2 | 3.4 | 18 | 0.3 | ±4 | 1.35 | SMA | 2~3 |
QPD8-100-3000-30-S | 0.1 | 3 | 30 | 2 | 6.5 | 18 | 0.3 | ±6 | 1.35 | SMA | 2~3 |
QPD8-100-4000-30-SMS | 0.1 | 4 | 30 | 2 | 6.5 | 12 | 0.5 | ±6 | 1.55 | SMA | 2~3 |
QPD8-108-138-50-N | 0. 108 | 0. 138 | 50 | 50 | 0.8 | 15 | 0.2 | ±4 | 1.25 | SMA | 2~3 |
QPD8-200-1000-30-S | 0.2 | 1 | 30 | 2 | 1.4 | 20 | 0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD8-200-1000-K1-S | 0.2 | 1 | 100 | 10 | 1 | 20 | ±0.3 | ±4 | 1.25 | SMA | 2~3 |
QPD8-200-2000-30-S | 0.2 | 2 | 30 | 2 | 2.8 | 18 | 0.3 | ±4 | 1.3 | SMA | 2~3 |
QPD8-200-2300-30-S | 0.2 | 2.3 | 30 | 2 | 3 | 18 | 0.3 | ±4 | 1.3 | SMA | 2~3 |
QPD8-200-6000-30-S | 0.2 | 6 | 30 | 2 | 6.8 | 17 | 0.5 | ±5 | 1.35 | SMA | 2~3 |
QPD8-223-235-30-S | 0.223 | 0.235 | 30 | 2 | 1.2 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD8-240-30-S | 0.24 | 30 | 2 | 0.6 | 20 | ±0.2 | ±2 | 1.2 | SMA | 2~3 | |
QPD8-300-500-30-S | 0.3 | 0.5 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.25 | SMA | 2~3 |
QPD8-300-3000-30-NS | 0.3 | 3 | 30 | 2 | 2.6 | 20 | 0.3 | ±4 | 1.3 | SMA&N | 2~3 |
QPD8-300-6000-30-S | 0.3 | 6 | 30 | 2 | 4.8 | 20 | 0.3 | ±6 | 1.4 | SMA | 2~3 |
QPD8-300-18000-20-S | 0.3 | 18 | 20 | 1 | 5 | 7 | ±0.5 | ±8 | 2.3 | SMA | 2~3 |
QPD8-400-900-30-B | 0.4 | 0.9 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | BNC | 2~3 |
QPD8-400-4000-30-N | 0.4 | 4 | 30 | 2 | 2.4 | 20 | 0.4 | ±4 | 1.35 | N | 2~3 |
QPD8-400-6000-30-S | 0.4 | 6 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD8-450-6000-30-S | 0.45 | 6 | 30 | 2 | 3.2 | 18 | 0.3 | ±4 | 1.35 | SMA | 2~3 |
QPD8-470-510-10-S | 0.47 | 0.51 | 10 | - | 2 | 20 | ±0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-470-510-20-S | 0.47 | 0.51 | 20 | - | 1.5 | 20 | ±0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-500-2000-30-S | 0.5 | 2 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD8-500-3000-30 | 0.5 | 3 | 30 | 2 | 1.8 | 20 | ±0.3 | ±4 | 1.3 | SMA, N | 2~3 |
QPD8-500-4000-30-NS | 0.5 | 4 | 30 | 2 | 2 | 20 | 0.3 | ±4 | 1.3 | SMA&N | 2~3 |
QPD8-500-4000-30-S | 0.5 | 4 | 30 | 2 | 2.3 | 20 | 0.2 | ±4 | 1.3 | SMA | 2~3 |
QPD8-500-6000-30 | 0.5 | 6 | 30 | 2 | 3 | 20 | ±0.2 | ±6 | 1.4 | SMA, N | 2~3 |
QPD8-500-8000-20 | 0.5 | 8 | 20 | 1 | 4 | 18 | 0.4 | ±5 | 1.5 | SMA, N | 2~3 |
QPD8-500-18000-20-S | 0.5 | 18 | 20 | 1 | 6 | 14 | 0.8 | ±10 | 2 | SMA | 2~3 |
QPD8-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 8 | 18 | ±0.5 | ±10 | 1.6 | SMA | 2~3 |
QPD8-500-40000-20-K | 0.5 | 40 | 20 | 2 | 11 | 15 | ±0.8 | ±12 | 1.8 | 2.92mm | 2~3 |
QPD8-600-2000-30-S | 0.6 | 2 | 30 | 2 | 1 | 20 | 0.3 | ±4 | 1.25 | SMA | 2~3 |
QPD8-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 18 | 0.4 | ±5 | 1.4 | SMA, N | 2~3 |
QPD8-600-8000-30-S | 0.6 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-700-3000-30 | 0.7 | 3 | 30 | 2 | 1.2 | 20 | ±0.2 | ±2 | 1.3 | SMA, N | 2~3 |
QPD8-700-4000-30-N | 0.7 | 4 | 30 | 2 | 1.8 | 20 | ±0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-750-1710-30-S | 0.75 | 1.71 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.2 | SMA | 2~3 |
QPD8-800-2000-30-S | 0.8 | 2 | 30 | 2 | 1 | 20 | 0.3 | ±4 | 1.25 | SMA | 2~3 |
QPD8-800-2500-30-N | 0.8 | 2.5 | 30 | 2 | 1.4 | 20 | 0.4 | ±4 | 1.25 | N | 2~3 |
QPD8-800-2700-30-N | 0.8 | 2.7 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-800-4200-30-S | 0.8 | 4.2 | 30 | 2 | 1.8 | 20 | 0.4 | ±4 | 1.4 | SMA | 2~3 |
QPD8-800-4200-K2-NS | 0.8 | 4.2 | 200 | - | 1.2 | 6 | 0.25 | ±7 | 1.3 | SMA&N | 2~3 |
QPD8-800-5000-20-S | 0.8 | 5 | 20 | 1 | 1.5 | 20 | ±0.4 | ±3 | 1.4 | SMA | 2~3 |
QPD8-800-6000-20-S | 0.8 | 6 | 20 | 2 | 2 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD8-800-8000-30-S | 0.8 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-870-1005-K3-N | 0.87 | 1.005 | 300 | 300 | 0.6 | 18 | 0.2 | 3 | 1.3 | N | 2~3 |
QPD8-950-2150-30 | 0.95 | 2.15 | 30 | 2 | 3 | 20 | 0.4 | ±4 | 1.25 | SMA, N, TNC, N&SMA | 2~3 |
QPD8-950-2150-30-S-DC | 0.95 | 2.15 | 30 | 1 | 0.6 | 20 | 0.3 | ±3 | 1.25 | SMA | 2~3 |
QPD8-1000-1700-30-S | 1 | 1.7 | 30 | 2 | 0.8 | 22 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD8-1000-2000-K2-NS | 1 | 2 | 200 | 200 | 0.5 | 12 | 0.5 | 5 | 1.5 | SMA&N | 2~3 |
QPD8-1000-2500-K2-S | 1 | 2.5 | 200 | 200 | 0.9 | 16 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-1000-2500-K2-NS | 1 | 2.5 | 200 | - | 0.5 | 8 | ±0.3 | ±4 | 1.4 | SMA&N | 2~3 |
QPD8-1000-2500-K3-NS | 1 | 2.5 | 300 | 300 | 0.7 | - | 0.5 | 8 | 1.5 | SMA&N | 2~3 |
QPD8-1000-3000-30-S | 1 | 3 | 30 | 2 | 1 | 18 | 0.3 | ±4 | 1.3 | SMA | 2~3 |
QPD8-1000-6000-30 | 1 | 6 | 30 | 2 | 2.1 | 20 | 0.2 | ±4 | 1.25 | SMA, SMP | 2~3 |
QPD8-1000-8000-K1-S | 1 | 8 | 100 | 100 | 1.8 | 20 | 0.4 | 3 | 1.5 | SMA | 2~3 |
QPD8-1000-18000-20-S | 1 | 18 | 20 | 1 | 4 | 15 | ±0.5 | ±10 | 1.8 | SMA | 2~3 |
QPD8-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 5.4 | 18 | ±0.5 | ±7 | 1.6 | SMA | 2~3 |
QPD8-1000-40000-20-K | 1 | 40 | 20 | 2 | 7.3 | 18 | ±0.7 | ±11 | 1.7 | 2.92mm | 2~3 |
QPD8-1000-50000-20-2 | 1 | 50 | 20 | 2 | 9.2 | 18 | ±0.9 | ±14 | 1.8 | 2.4mm | 2~3 |
QPD8-1100-1700-30-T | 1.1 | 1.7 | 30 | 2 | 0.8 | 22 | 0.3 | ±3 | 1.25 | TNC | 2~3 |
QPD8-1270-1460-K8-NS | 1.27 | 1.46 | 800 | 800 | 0.5 | 14 | 0.2 | 3 | 1.5 | SMA&N | 2~3 |
QPD8-1270-1460-1K12-EN | 1.27 | 1.46 | 1120 | 1120 | 0.5 | 14 | 0.2 | 3 | 1.5 | SC&N | 2~3 |
QPD8-1370-30-S | 1.37 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | SMA | 2~3 | |
QPD8-1500-1700-20-S | 1.5 | 1.7 | 20 | 1 | 0.3 | 20 | ±0.2 | ±4 | 1.25 | SMA | 2~3 |
QPD8-1500-5000-30-S | 1.5 | 5 | 30 | 2 | 1.2 | 20 | ±0.2 | ±2 | 1.3 | SMA | 2~3 |
QPD8-1525-1850-K1-N | 1.525 | 1.85 | 100 | 10 | 0.8 | 18 | 0.3 | ±4 | 1.2 | N | 2~3 |
QPD8-1805-1880-K2-S | 1.805 | 1.88 | 200 | 200 | 0.9 | 18 | 0.2 | 4 | 1.4 | SMA | 2~3 |
QPD8-1850-2700-K25-N | 1.85 | 2.7 | 250 | 15 | 0.8 | 18 | 0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-2000-4000-K16-S | 2 | 4 | 160 | - | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-2000-6000-30 | 2 | 6 | 30 | 2 | 1.2 | 18 | 0.4 | ±4 | 1.3 | SMA, N | 2~3 |
QPD8-2000-6000-K65-7N | 2 | 6 | 650 | 650 | 0.8 | - | 0.4 | 10 | 1.6 | 7/16 DIN&N | 2~3 |
QPD8-2000-8000-30-S | 2 | 8 | 30 | 2 | 1.5 | 20 | 0.4 | ±3 | 1.35 | SMA | 2~3 |
QPD8-2000-10000-30-S | 2 | 10 | 30 | 2 | 2 | 18 | ±0.4 | ±4 | 1.4 | SMA | 2~3 |
QPD8-2000-18000-20-S | 2 | 18 | 20 | 1 | 3.2 | 16 | 0.5 | ±10 | 1.6 | SMA | 2~3 |
QPD8-2000-26500-20 | 2 | 26.5 | 20 | 1 | 3.2 | 16 | ±0.8 | ±10 | 1.9 | SMA, 2.92mm | 2~3 |
QPD8-2000-40000-20-K | 2 | 40 | 20 | 2 | 5.9 | 18 | ±0.7 | ±10 | 1.7 | 2.92mm | 2~3 |
QPD8-2000-50000-20-2 | 2 | 50 | 20 | 1 | 7.2 | 18 | ±0.8 | ±12 | 1.8 | 2.4mm | 2~3 |
QPD8-2400-6000-30-S | 2.4 | 6 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.35 | SMA | 2~3 |
QPD8-2700-3100-K2-S | 2.7 | 3.1 | 200 | - | 0.9 | 18 | 0.3 | ±5 | 1.5 | SMA | 2~3 |
QPD8-3000-13000-20-S | 3 | 13 | 20 | 1 | 2 | 18 | ±0.4 | ±6 | 1.4 | SMA | 2~3 |
QPD8-4000-6000-30-S | 4 | 6 | 30 | 2 | 1.2 | 18 | ±0.4 | ±4 | 1.4 | SMA | 2~3 |
QPD8-4000-8000-30-S | 4 | 8 | 30 | 2 | 0.8 | 18 | ±0.3 | ±5 | 1.35 | SMA | 2~3 |
QPD8-4000-12000-20-S | 4 | 12 | 20 | 1 | 1.5 | 18 | 0.2 | ±4 | 1.5 | SMA | 2~3 |
QPD8-4000-18000-30-S | 4 | 18 | 30 | 1 | 1.8 | 16 | ±0.5 | ±6 | 1.8 | SMA | 2~3 |
QPD8-4900-5900-30-S | 4.9 | 5.9 | 30 | 2 | 0.8 | 20 | 0.3 | ±3 | 1.3 | SMA | 2~3 |
QPD8-5000-12000-20-S | 5 | 12 | 20 | 1 | 1.2 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD8-5800-6500-K1-S | 5.8 | 6.5 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-6000-6500-K15-S | 6 | 6.5 | 150 | 150 | 1 | 17 | 0.5 | 5 | 1.5 | SMA | 2~3 |
QPD8-6000-10000-K15-NS | 6 | 10 | 150 | 150 | 1 | - | 0.5 | 10 | 1.8 | SMA&N | 2~3 |
QPD8-6000-12000-20-SM | 6 | 12 | 20 | 1 | 1.5 | 18 | 0.4 | ±5 | 1.5 | SMA | 2~3 |
QPD8-6000-18000-50-S | 6 | 18 | 50 | - | 2.4 | 17 | ±0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-50-SMS | 6 | 18 | 50 | - | 2.4 | 17 | ±0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-K1-S | 6 | 18 | 100 | - | 2.4 | 15 | ±0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-K3-S | 6 | 18 | 300 | 300 | 1.8 | 17 | 0.5 | 5 | 1.75 | SMA | 2~3 |
QPD8-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 2.9 | 18 | ±0.5 | ±6 | 1.6 | SMA | 2~3 |
QPD8-6000-40000-20-K | 6 | 40 | 20 | 1 | 3.2 | 15 | ±0.5 | ±8 | 2.2 | 2.92mm | 2~3 |
QPD8-7130-7245-K1-S | 7.13 | 7.245 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-8000-9000-K1-S | 8 | 9 | 100 | - | 1.5 | 18 | ±0.5 | ±5 | 1.35 | SMA | 2~3 |
QPD8-8000-12000-20-S | 8 | 12 | 20 | 1 | 1.4 | 18 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-9000-11000-20-S | 9 | 11 | 20 | 1 | 1.2 | 18 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-9000-45000-R1-2 | 9 | 45 | 0.1 | - | 7 | 15 | ±1 | ±20 | 1.4 | 2.4mm | 2~3 |
QPD8-17000-31000-20-K | 17 | 31 | 20 | 1 | 2 | 16 | ±0.5 | ±6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-26500-20-K | 18 | 26.5 | 20 | 1 | 1.8 | 16 | ±0.5 | ±6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-40000-20-K | 18 | 40 | 20 | 1 | 3.2 | 16 | ±0.5 | ±8 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-40000-30-K | 18 | 40 | 30 | 1 | 3.6 | 15 | ±0.6 | ±6 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-50000-20-2 | 18 | 50 | 20 | 1 | 4.2 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |
QPD8-18000-50000-20-2-1 | 18 | 50 | 20 | - | 2.5 | 20 | 0.5 | 8 | 1.6 | 2.4mm | 2~3 |
QPD8-24000-44000-20-2 | 24 | 44 | 20 | 1 | 3.6 | 18 | ±0.6 | ±8 | 1.7 | 2.4mm | 2~3 |
QPD8-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 3 | 18 | ±0.5 | ±8 | 1.6 | 2.92mm | 2~3 |
QPD8-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 4.2 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |
QPD8-27000-32000-20-K | 27 | 32 | 20 | 1 | 1.8 | 18 | ±0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-35350-36150-20-K | 35.35 | 36.15 | 20 | 1 | 1.8 | 18 | ±0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-37450-39350-10-K | 37.45 ~ 39.35 | 10 | 1 | 2.4 | 15 | ±0.6 | ±6 | 1.6 | 2.92mm | 2~3 | |
QPD8-40000-67000-12-V | 40 | 67 | 12 | 1 | 5.9 | 16 | ±1 | ±12 | 1.9 | 1.85mm | 2~3 |
QPD8-50000-66000-R1 | 50 | 66 | 0.1 | - | 6 | 15 | ±1 | ±20 | 1.4 | - | 2~3 |